Table of Contents
Advertisement
DS41
The WRONG output is used either for "Verifier" mode or for PCS control
(PCS control is available for DSP models only, see paragraph 1.3). For
Verifier this output activates when the decoded code does not correspond to
the one set in the configuration. For PCS this output activates when the PCS
level is below the threshold value.
DS41
These outputs are all level or pulse programmable: a 50 ms pulse is
generated in the second case. Further programming information is supplied
in the section "Output Lines" in the WINHOST Help On Line.
2.8
POSITIONING
The DS41 scanner is able to decode moving barcode labels at a variety of
angles, however significant angular distortion may degrade reading
performance.
When mounting the DS41 take into consideration these three ideal label
position angles: Pitch 0° , Skew 10° to 30° and Tilt 0°.
Follow the suggestions below for the best orientation:
The Pitch angle is represented by the value P in figure 2.30. Position the
reader in order to minimize the Pitch angle.
2.24 - Installation
14
WRONG+
15
WRONG-
Figure 2.29 - WRONG code output connection
USER INTERFACE
Vext 40 Vdc max
DATALOGIC
Advertisement
Table of Contents
