Table of Contents
Advertisement
DS41
SOFTWARE FEATURES
READABLE CODE SYMBOLOGIES
Code 93 (Standard and Full ASCII)
EAN/UPC (including Add-on 2 and Add-on 5)
Code 39 (Standard and Full ASCII)
2/5 Interleaved
Codabar
Code 128
EAN 128
Plessey
CODE SELECTION
CODE POSITON
DECODING SAFETY
HEADERS AND TERMINATORS
OPERATING MODES
CONFIGURATION MODES
PARAMETER STORAGE
ENVIRONMENTAL FEATURES
Operating temperature (Note 4)
Storage temperature
Humidity max.
Vibration resistance
Shock resistance
Protection class
PHYSICAL FEATURES
Mechanical dimensions
Weight
Note 1: Refer to paragraph 1.3 for model descriptions.
Note 2: The features given are typical at a 25 °C ambient temperature (if not otherwise
indicated).
Note 3: Further details given in paragraphs 3.3 and 3.4.
Note 4: If the reader is used in high temperature environments (over 35 °C), use of the Beam
shutter is advised (for details refer to the section "Beam shutter" in the Help On Line
of the WINHOST utility program provided with the DS41 disk.
5.2 - Technical features
DSP MODELS
(Note 1)
Up to 22 readable symbologies including:
•
•
•
•
•
•
•
up to six codes during one reading phase
can be verified and
displayed
can enable multiple good reads of same
code
up to four headers and four terminators
,
,
ON LINE
AUTOMATIC
•
through menus using WINHOST utility
•
receiving commands from one of the
serial ports (HOST MODE)
Non-volatile internal EEPROM
0 to 40 °C
-20 to 70 °C
90% non condensing
IEC 68-2-6 test FC 1.5 mm;
10 to 55 Hz; 2 hours on each axis
IEC 68-2-27 test EA 30G;
11 ms; 3 shocks on each axis
IP65
101 x 83.5 x 42 mm
800 g.
DATALOGIC
NPP MODELS
(Note 1)
•
•
•
•
•
•
•
•
cannot be verified
and displayed
,
SERIAL ON LINE
TEST
Advertisement
Table of Contents
