Table of Contents
Advertisement
Removing the inner door glass
(SK420)
The inner pane of glass can be
removed for cleaning purposes. To
do so, follow the steps below and the
image at the bottom of this page.
Important: Do not disassemble the
door without it having been removed
from the oven as per page 21/22. Weight differences could cause
the door to snap shut, causing damage to the oven and/or the
user.
•
Remove both door top corner pieces. These can be removed by
pressing in the arrow-marked tabs (indicated in image below) and
sliding the corner pieces in the direction indicated in the image
below.
•
Lift the top edge of the glass slightly and then slide the lower edge
from its clips.
•
After cleaning the glass, replacement is a reversal of the removal
process. Take care to replace the glass the correct way round -
the printed surface must be visible when the door is opened.
Fig. 4
Tab
23
Advertisement
Table of Contents
