Table of Contents
Advertisement
warm water and then wiped dry with a suitable, clean cloth.
Suitable proprietary chemical cleaners may be used after first
consulting with the manufacturers' recommendations and testing a
sample on a small area of the oven cavity. Abrasive cleaning agents
or scouring pads/cloths should not be used on the cavity surface.
IMPORTANT:
•
Steam cleaners must not be used when cleaning this appliance.
•
Once care and maintenance is complete, ensure that all parts
are correctly replaced before using the oven.
Removing the appliance door
In order to allow for easier access into the oven cavity for cleaning, it
is possible to remove the door. Before removing the door, ensure that
you have an area prepared in which you can place the removed door.
This area should ideally be protected by something like a folded, dirt-
free, towel to help prevent damage to surfaces and the door.
Use the images on page 22 to aid you alongside the instructions
below.
•
Open the door to the full extent (1).
•
Open the lever A completely on the left and right hinges (2).
•
Raise and hold the door as shown in image 5 on page 22.
•
Gently close the door (3) until left and right hinge levers A are
hooked to part B of the door (2).
•
Withdraw the hinge hooks from their location following arrow C (4).
•
Rest the door on the pre-prepared soft, clean surface.
21
Advertisement
Table of Contents
