Table of Contents
Advertisement
Replacing the appliance door
•
Hold the door to the appliance in
the closed position and manoeuvre
the hinges so that the part of the
hinge, highlighted in fig. 5, inserts
into/hooks over the hinge slot in the
cavity frame.
•
Ensure the notch on the underside
of the hinge sits on the lip of the
hinge slot. Open the door fully. Each
hinge should be seated in the same
way as the hinge in fig. 5. If it is not,
follow the steps for removing the
door and try replacing it again.
•
Finally, manoeuvre the safety catch
part of the hinges back into place
so that they are lying flat against the
hinges (Fig. 6).
Please note: If the hinge safety catches are not in the correct
place then the door and/or appliance may receive damage when
attempting to close the door.
Removing the inner door glass
With the door removed, the inner glass can also be taken out for
cleaning purposes. Instructions are on page 27.
26
Fig. 5
Fig. 6
Advertisement
Table of Contents
