Table of Contents
Advertisement
Before any pyrolytic programme, remove all shelves, trays and
other accessories from the oven and clean up any major spills to
avoid the risk of fire or excessive smoke.
During the pyrolytic process the oven exterior including the door
will become hotter than during normal cooking. Children and pets
must be kept away from the oven. Do not hang towels or cloths on
the oven handle at any time.
Using your oven
This oven is equipped with touch control sensors. Each registered
touch of a sensor field is confirmed by a single beep. It is advisable to
keep the sensor fields clean at all times to avoid errors in operation.
Setting the current time
After connection to the mains supply, or re-connection after a power
outage, the display will show '00:00'.
•
Set the current time using the
approximately 5 second wait, the time will be set.
•
The time can be amended at any time by following these steps.
However, you will firstly need to press
blinks. Then, follow the step above.
Please note: The time must be set for the oven to work.
Switching the oven on
Press and hold the
14
and
sensor for approximately 3 seconds.
sensors. After an
until the time display
Advertisement
Table of Contents
