Removing The Inner Door Glass - CDA SK320 Installation, Use And Maintenance Manual

Removing the inner door glass

The inner pane of glass can be removed for cleaning purposes. To do
so, follow the steps below.
Important: Do not disassemble the door without it having been
removed from the oven as per page 18. Weight differences could
cause the door to snap shut, causing damage to the oven and/or
the user.
• Remove both door top corner pieces. These can be removed by
pressing in the arrow-marked tabs (indicated in image below) and
sliding the corner pieces in the direction indicated in the image
below.
• Lift the top edge of the glass slightly and then slide the lower edge
from its clips.
• After cleaning the glass, replacement is a reversal of the removal
process. Take care to replace the glass the correct way round -
the printed surface must be visible when the door is opened.
20
Tab