Booster Function; Safety Key Lock - CDA SK420 Installation, Use And Maintenance Manual

Booster function

The oven is equipped with a booster function to heat it up to
operating temperature as fast as possible. After selecting the oven
function and setting the temperature, touch the
booster function works on all cooking functions but is not required
for the pyrolytic function (SK520 only). Once the set temperature has
been reached, the booster function will deactivate.
IMPORTANT: Do not put any food into the oven whilst the booster is
operating. Wait until the oven has reached temperature, signified by
the booster symbol going out.
Auto cut-off feature
There is an auto cut-off feature on all cooking functions for added
safety. When a cooking function is running, it will switch off after a set
period of time, depending on the temperature setting as below:
Selected Temperature

Safety key lock

The appliance features a safety key lock which locks the control
panel. This can be used whilst a cooking function is active.
To switch on the safety key lock;
• Touch and hold the
The display should show 'LOC' to confirm that the lock is active.
18
20-120℃
121-200℃
201-250℃
and
24 h
6 h
3 h
sensors for approximately 3 seconds.
sensor. The