Automatic Cooking - CDA SK420 Installation, Use And Maintenance Manual

Automatic cooking

The oven can be set to switch off automatically at preset time up to a
maximum of 23 hours and 59 minutes from when you set it.
• Set the oven function and temperature.
• Whilst the display is still flashing, touch the
symbol illuminates and flashes. Whilst this symbol is flashing,
use the and
• Touch the
the and
oven to finish cooking (end of cooking time).
• Close the door, if open, and press the
should stay solidly lit. The oven should begin cooking based on
the end of cooking time minus the duration. So, if you have set the
end of cooking time to 15:30 and the duration to 45 minutes, the
oven will begin heating at 14:45. Once complete, the oven should
switch the function off.
• Press any of the
acoustic signal that sounds.
• Turn the oven off by pressing and holding the
approximately 3 seconds.
Please note: Pause operation of the oven before making any
adjustments to cooking times.
IMPORTANT: OPENING THE OVEN DOOR AT ANY POINT DURING
NORMAL COOKING OPERATION WILL PAUSE THE ACTIVE
FUNCTION. YOU WILL NEED TO CLOSE THE DOOR AND PRESS
THE SENSOR TO RESUME.
sensors to set the desired cooking duration.
sensor until the
sensors to set the time at which you would like the
and sensors in order to deactivate any
sensor until the
symbol illuminates. Then, use
sensor. The
sensor for
symbol
17