Table of Contents
Advertisement
Installation
Important! If installing this oven below a hob, ensure that the air
gap between the two appliances is observed. This gap is usually
detailed in the hob's manual.
The installation of this appliance must be carried out by suitably
qualified personnel. We recommend seeking the help of another
person for the installation process. This appliance may have sharp
edges; always wear suitable PPE (Personal Protective Equipment).
If the oven is being installed into a built under oven housing unit
ensure that the front rail at the top of the unit is not installed as it
could restrict ventilation.
Ensure that air can flow freely around
the housing area. If the oven is being
installed into a fully enclosed built-under
oven housing unit it may be necessary
to cut a small slot in the top of the plinth
fitted under the unit. Cut a section 400 mm
wide and a minimum of 15 mm high to allow air to pass under the unit.
Alternatively cut a section 400 x 450 mm in the base of the carcass as
indicated in Fig. 5.
Failure to allow adequate ventilation to the appliance may result in
overheating or damage to adjacent units and could invalidate the
warranty.
This appliance is type X installation. The walls of the kitchen units
must be able to withstand temperatures of 100°C +.
28
400
450
600
Fig. 5
Advertisement
Table of Contents
