Table of Contents
Advertisement
When correctly installed ensure that there is a gap of 4 mm minimum
between the sides of the oven and adjacent furniture doors.
How to install your oven
You will need the housing area in fig. 6 to fit your oven correctly.
The oven is designed to fit into a cabinet of 600 mm width. The oven
can be built in or built under the kitchen units, but you must ensure
that it is properly ventilated. In the diagram below the built-in oven
is ventilated by means of a space at the top of the kitchen cabinet.
There are many other methods of ventilating your oven - consult a
qualified engineer for advice.
Lift the oven carefully into position on the shelf, taking care NOT to
lift it by the door handle. If you open the oven door, you will see 4
screw holes, 2 on each side of the oven (image S fig. 6). The oven
should then
be secured to
40
the housing by
564
securing screws
554
into these holes.
600
564
595
560
Remember the
housing should
547
600
595
not be free
20
standing but
be secured to
the wall and/
S
or adjacent
fittings.
Fig. 6
29
Advertisement
Table of Contents
