Table of Contents
Advertisement
Replacing the appliance door
•
Hold the door to the appliance in the closed position and
manoeuvre the hinges so that the part of the hinge, highlighted by
the star in fig. 3, inserts into the hinge slot in the cavity frame.
•
Next, ensure the notch on the underside of the hinge sits on the
lip of the hinge slot. Open the door fully. Each hinge should be
seated in the same way as the hinge in fig. 4. If it is not, follow the
steps for removing the door and try replacing it again.
•
Finally, lift the safety catch part of the hinges back into place so
that they are lying flat against the hinges. Please note: If the
hinge safety catches are not in the correct place then the door
and/or appliance may receive damage when attempting to
close the door.
22
1
3
5
Fig. 3
A
B B
2
C
`
4
Advertisement
Table of Contents
