Table of Contents
Advertisement
Troubleshooting
Problem
The appliance does not work
Oven lighting does not work.
Oven is not heating
The cooling fan does not work
on a heated function
If any of the above steps do not resolve your issue, please contact
CDA Customer Care to arrange a repair. Contact details are below.
Please have to hand all the details from your appliance's rating plate
which can be found on the back of the oven and/or on the back of the
instruction manual/warranty card.
Important: All repairs must be carried out by qualified service
technicians.
Contact CDA Customer Care
A: Customer Care Department, The CDA Group Ltd, Harby Road,
Langar, Nottinghamshire, NG13 9HY
T: 01949 862 012
E: customer.care@cda.eu W: www.cda.eu
32
Potential cause
No power
Loose or damaged bulb
Temperature has not been set
If the programmer shows 00:00
(or 00:01 etc.) then the current
time has not been set.
Risk of overheating! Unplug the appliance or switch
at the mains isolator. Contact CDA Customer Care.
F: 01949 862 003
Potential remedy
Check the fuse, replace if blown.
Check the mains supply is on.
Replace the blown bulb (see
page 24 and page 26).
Set the desired temperature
using the temperature knob.
Set the current time as per page
14.
Advertisement
Table of Contents
