CDA SK420 Installation, Use And Maintenance Manual page 13

Pyrolytic Oven - Default 420°C - SK520 only
NOTE: This function has an added safety feature to
prevent it from being selected accidentally. To run the
pyrolytic function, select "Pyrolytic" on the "Function
Selector Display", then press the
will lock and remain locked until the appliance is cool.
This oven can clean itself by a process known as pyrolysis, heating the
cavity to a temperature of approximately 420˚C. This will burn off the
residue from spattering and spillages caused by cooking.
Pyrolytic programmes should be used when the oven smokes during
preheating or cooking or if the oven smells even when cold. It is not
necessary to run a pyrolytic programme after every use of the oven.
Do not wait until the oven is coated in grease to run a pyrolytic
programme.
The smoke produced by pyrolysis is broken down by passing through a
catalyser.
After a pyrolytic function has been completed, disconnect the appliance
from the power supply and wipe clean the interior of the oven with a
damp, clean cloth. Allow the interior to dry before reconnecting the
power to the appliance.
Eco Fan Oven - Default 180°C
With this function, the appliance is saving energy. This
produces similar results to normal fan oven but saves
energy.
sensor. The door
13