Combo Connector For Microsd And Microsim; Table 31: Pin Assignment Microsim; Table 32: Pin Assignment Microsd; Figure 31: Combo Connector For Microsd And Microsim - Kontron mITX-APL User Manual

6.23. Combo Connector for MicroSD and MicroSIM

The mITX-APL supports eMMC interface 5.0 with a maximum bus speed of 400 MB/s. The board will also support a
SD card interface UHS-I standard with a maximum bus speed of 104 MB/s.
 The eMMC chip is soldered on board.
 The microSD card interface is sharing a combo connector with the micro SIM card.

Figure 31: Combo Connector for MicroSD and MicroSIM

Table 31: Pin Assignment MicroSIM

Pin Type
1 V_VCC
2 RST
3 CLK_S3
4 RSVD_S4
5 GND_S5
6 V_VPP
7
I/O
8 RSVD_S8

Table 32: Pin Assignment MicroSD

Pin Type
1 DAT2
2 CD/DAT3
3
CMD
4
V_VDD
5 CLK_T5
6 VSS/GND
7 DAT0
8 DAT8
www.kontron.com
Doc. Rev. 1.2
mITX-APL
// 40