Exit Setup Menu; Figure 39: Save And Exit Setup Menu Initial Screen - Kontron mITX-APL User Manual

Function
PS2 Support
Network Stack Driver Support
Redirection Support
New Boot Option Policy
Hard Drive BBS Priotities

7.2.7. Exit Setup Menu

The Save and Exit Setup menu provides functions for handling changes made to the uEFI BIOS settings and exiting
the Setup program.
If system cannot boot or work properly due to incorrect setting, shorting Pin-1 and Pin-2 on
J15 jumper will load the default setting of BIOS upon power cycle. Once safely booted with
default setting, you may undo the jumper setting to save new changes on BIOS Setup Menu.

Figure 39: Save and Exit Setup Menu Initial Screen

The following table shows the Exit menu sub-screens and functions, and describes the content.
Description
Controls the placement of newly detected UEFI boot options
Sets the placement of legacy boot options
www.kontron.com
Doc. Rev. 1.2
mITX-APL
// 59