Sata Power Connector (J14); Display Port; Table 26: Pin Assignment; Table 27: Display Port - Kontron mITX-APL User Manual

Figure 26: Available Cable Kit

6.19. SATA Power Connector (J14)

Figure 27: SATA Power Connector

Table 26: Pin Assignment

Pin Signal
1 +5VS
2 GND
3 GND
4 +12VS

6.20. Display Port

The two external Display Port 1.2 at rear I/O space are supporting Active/Passive HDMI 1.4a and DVI adapters.

Figure 28: Display Port

Table 27: Display Port

Pin Signal
1 ML_Lane 0 (p)
2
GND
3
ML_Lane 0 (n)
4 ML_Lane 1 (p)
5 GND
6 ML_Lane 1 (n)
Description Type
Power +5V PWR
Ground PWR
Ground PWR
Power +12V PWR
Description
Lane 0 (positive)
Ground
Lane 0 (negative)
Lane 1 (positive)
Ground
Lane 1 (negative)
www.kontron.com
Doc. Rev. 1.2
mITX-APL
// 37