Table of Contents
Advertisement
CONFIGURING THE VIDYOPANORAMA SETTINGS AND OPTIONS
The VidyoRemote Configuration tab enables you to configure various VidyoPanorama settings and options,
including cluster information, network controls, video encoding and decoding preferences, and other
options. You should configure these settings immediately after logging in to the Admin pages for the first
time, and you should only change these settings when you are not in a call.
Configuring the Cluster
To configure the cluster:
1.
Select the Admin page Configuration tab.
2.
If needed, click the blue triangle next to the word Cluster to view the cluster settings.
3.
Enter the cluster name in the Cluster Name field.
This is the cluster name that you created when you first accessed the web site for the Decoder
Nodes (for more information, see the "Assigning the Cluster Name and Node Names" section on
page 29).
4.
Enter the node name in the Node Name field.
This is the node name that you created when you first accessed the web site for the Decoder Nodes
(for more information, see the "Assigning the Cluster Name and Node Names" section on page 29).
38
Chapter 3: Configuring VidyoPanorama
Advertisement
Table of Contents
