Table of Contents
Advertisement
This chapter describes how to configure VidyoPanorama using the Admin pages.
Before you begin, ensure that you have VidyoPortal version 2.1.4 or later. This version is required for use
with VidyoPanorama.
ACCESSING THE ADMIN PAGES
The first time you access the Admin pages, you will have access to only the System Information and About
tabs. You will also have to specify an Admin user name and password, and then log in. From then on, you
will have access to all the Admin page tabs.
To access the Admin pages for the first time:
1.
Open a browser on the computer that is connected to the Controller Node (also known as the Con-
trol Point).
2.
Enter this address:
http://localhost:8080/vidyopanorama
You will then access the Admin pages, but you will only see the System Information and About tabs.
Configuring VidyoPanorama
(case sensitive)
34
Chapter 3: Configuring VidyoPanorama
3
Advertisement
Table of Contents
