Vidyo VidyoPanorama Installation And Configuration Manual page 36

2. View this information:

Cluster Name: Think of this as a group name that is used for associating the Decoder Nodes to
the Controller Node (or Control Point). For example, a Controller Node with the cluster name
"Vidyo" will find and associate with all the Decoder Nodes that have "Vidyo" as the cluster
name. By default, VidyoPanorama systems ship with the same cluster name so that when the
Decoder Nodes power up, they all appear on the Controller Node Admin pages and are all
associated with each other.

Control Point Name: The Controller Node software name.
 IPV4 Address: The IP address.

Portal: The name of the VidyoPortal.

User: The name of the user who is logged in.
 Selected Camera: The camera that is currently showing video.

Selected Speaker: The speaker that is currently receiving audio.
 Selected Microphone: The microphone that is currently transmitting audio.
 Content Capture Device: The capture device connected to the system, such as the Epiphan
VGA2USB LR frame grabber.

Decoder Nodes: The number of Decoder Nodes associated with that Controller Node.
 Encoder Nodes: The number of Encoder Nodes. For the VidyoPanorama version 1.0 release, this
setting will always be 1.

Remote Control: Indicates whether or not the VidyoRemote is connected.
 Version: The VidyoPanorama software version currently being used.
36
Chapter 3: Configuring VidyoPanorama