Installing The Equipment - Vidyo VidyoPanorama Installation And Configuration Manual

NOTE: The rails for the Controller Node and Decoder Nodes support a wide variety of racks, but they do not
support the ability to extend the Nodes out of the rack for service. Thus, they don't provide support for a
cable management arm (CMA).

Installing the Equipment

To install the equipment:
1. Install the components into the equipment rack in this order (starting at the top of the rack):
 Power distribution unit (PDU) or Uninterruptible Power Supply (UPS)
You may have more than one PDU or UPS depending on how many Decoder Nodes you have.

Wireless access point

Network switch
 Audio mixer or audio amplifier
The ClearOne Interact AT option includes an audio mixer. The USB I/O audio option includes an
audio amplifier.

Optional KVM
 Controller Node
Use the provided rack-mount rails to mount the Controller Node and Decoder Nodes.

Decoder Nodes
The following illustration shows the components mounted in a Middle Atlantic rack for a VidyoPano-
rama system with nine displays. Although your rack may look different, you should still install the
components in the positions shown.
22
Chapter 2: Installing VidyoPanorama