Vidyo VidyoPanorama Installation And Configuration Manual page 28

b.
Connect an Ethernet cable from each Decoder Node to the network switch.
c.
Connect an Ethernet cable from the audio mixer to the network switch.
d.
Connect an Ethernet cable from the wireless access point to the network switch.
e.
Connect an Ethernet cable from the network switch to the network.
5. Connect the power cables:
a.
Connect the power cable from the Controller Node to the PDU or UPS.
b.
Connect the power cable from each Decoder Node to the PDU or UPS.
c.
Connect the power cable from the KVM to the PDU or UPS.
d.
Connect the power cable from the audio mixer to the PDU or UPS.
e.
Connect the power cable from the wireless access point to the PDU or UPS.
f.
Connect the power cable from the network switch to the PDU or UPS.
g.
If you have an audio amplifier, connect the power cable from the audio amplifier to the PDU or
UPS.
h.
If you have a small VGA monitor connected to the Controller Node, connect the power cable
from the VGA monitor to the PDU or UPS.
i.
Connect the power cable from the PDU or UPS to a power outlet.
j.
Connect the power cable from each display to a power outlet.
28
Chapter 2: Installing VidyoPanorama