Vidyo VidyoPanorama Installation And Configuration Manual page 25

3. Connect the audio cables:

If you have the ClearOne Interact AT option with the Mic EX and XLR microphones:
a.
Connect a USB connector on a USB cable to a USB connector on the Controller Node, and
connect the USB connector on the other end of the cable to the Interact Com-W.
b.
Connect the RJ-45 connector on an RJ-45 cable to the Link Out port on the Interact Com-W,
and connect the RJ-45 connector on the other end of the cable to the Link In port on the In-
teract Mic EX.
c.
Connect the RJ-45 connector on an RJ-45 cable to the Link Out port on the Interact Mic EX,
and connect the RJ-45 connector on the other end of the cable to the Link In port on the In-
teract AT audio mixer.
d.
Connect the XLR connector on the XLR-to-Mic cable to the Mic 1 port on the Interact Mic EX,
and connect the Mic connector on the other end of the cable to the XLR microphone.
e.
Connect the XLR connector on the XLR-to-Mic cable to the Mic 2 port on the Interact Mic EX,
and connect the Mic connector on the other end of the cable to the XLR microphone.
25
Chapter 2: Installing VidyoPanorama