Installer Manual Fleck 9100 - SXT - Programming
6.5.12. Regeneration time (RT)
Set the regeneration time.
Note
Regeneration time is the time of the day when regenerations occur for delayed regeneration
of any type and calendar override regeneration.
X
Press
or
Y
Press
to validate the selection and move to the next parameter.
6.5.13. Regeneration cycle step duration
Set the duration in minute of each regeneration cycle.
Note
Setting a cycle step to 0 will cause the controller to skip that step during regeneration, but
keeps the following steps available.
Note
The different regeneration cycles are listed in sequence based on the regeneration flow
selected for the system.
Note
All cycles can be set from 0 to 199 minutes.
6.5.13.1 Regeneration abbreviations
B1
First backwash
B2
Second backwash
BD
Brine draw
6.5.13.2 For pre-set regeneration cycles
Z
Press
or
AA Press
to validate the selection and move to the next parameter.
48 / 94
to set the regeneration time.
to set the regeneration time.
BF
Brine fill
BW
Backwash
RR
Rapid rinse
Ref. MKT-IM-004 / A - 27.10.2016