Installer Manual Fleck 5800 - XTR - Maintenance
9.2.5. Replacing the piston and/or the brine valve
No.
A
Remove the gearing system, see "Power head disassembly/replacement", page 98.
B
Remove the screws (1).
Remove the piston and the top plate (2) by pulling the top plate on the points indicated by
C
arrows.
D
Remove the o-ring (4).
E
Remove the brine valve (5).
F
Change the piston (3) and/or the brine valve (5).
G
Lubricate the o-ring (4) with approved silicone grease.
H
Reverse above procedure steps to rebuild.
100 / 122
Operation
Ref. MKT-IM-006 / B - 16.01.2018