Replacing The Controller - Pentair FLECK 9100 SXT Installer Manual

9.2.2. Replacing the controller

No.
A Loosen the wheels (1) and open the valve cover (2).
B Push the controller (3).
C Press the controller clips (5) and open the controller cover (4).
D Disconnect the old controller (7) and remove it opening the card clips (6).
E Connect the new controller, see 5.8. Connections (electrical), page 38.
F Reverse above procedure steps to rebuild.
Ref. MKT-IM-004 / A - 27.10.2016
Installer Manual Fleck 9100 - SXT - Maintenance
Operation
59 / 94