9.2.5. Replacing the piston and/or the brine valve
No.
A
Remove the gearing system, see "Replacing the gearing system", page 72.
B
Remove the screws (1).
Remove the piston and the piston cover (2) by pulling the piston cover on the points
C
indicated by arrows.
D
Remove the o-ring (4).
E
Remove the brine valve (5).
F
Change the piston (3) and/or the brine valve (5).
G
Lubricate the o-ring (4) with approved silicon grease.
H
Reverse above procedure steps to rebuild.
Ref. MKT-IM-004 / A - 18.04.2017
Installer Manual Fleck 5800 - SXT - Maintenance
Operation
73 / 92