Dsview Server Ip Addresses; User Accounts; Managing Local Accounts; Access Levels - Vertiv Avocent MergePoint Unity Installer/User Manual

To add target devices to the Scan list:
1. From the side navigation bar, select Unit View - Target Devices to open the Target Devices
screen.
2. Select the checkboxes next to the names of the target devices you wish to scan.
3. Click Scan.
To configure Scan Time:
1. From the side navigation bar, select Unit View - Appliance - Appliance Settings - Ports - Local
Port UI to open the Local Port UI Settings screen.
2. Under the Scan Mode heading, enter an amount of time in seconds (from 3-255) in the Scan
Time field.
3. Click Save.

3.11 DSView Server IP Addresses

You can contact and register an unmanaged switch with a DSView server by specifying the IP addresses
of up to four DSView servers.
To configure the DSView server IP address:
1. On the side navigation bar, select Unit View - Appliance - Appliance Settings - User Accounts -
DSView. The Appliance DSView Settings screen is displayed.
2. Enter up to four DSView software server IP addresses that you want to contact in the Server 1 -
4 fields.
3. Click Save.

3.12 User Accounts

3.12.1 Managing local accounts

The MergePoint Unity switch for Dell OBWI provides local and login security through administrator-
defined user accounts. By selecting Local Accounts on the side navigation bar, administrators may add
and delete users, define user preemption and access levels and change passwords.

3.12.2 Access levels

When a user account is added, the user may be assigned to any of the following access levels: Appliance
administrators, User administrators and Users.
Table 3.6 Allowed Operations by Access Level
OPERATION
Configure interface system-level settings
Vertiv™ | Vertiv™ Avocent® MergePoint Unity™ Switch for Dell® Installer/User Guide |
ACCESS LEVEL
APPLIANCE ADMINISTRATOR
Yes
USER ADMINISTRATOR
No
USERS
No
27