Snmp Settings - Vertiv Avocent MergePoint Unity Installer/User Manual

OPERATION
Configure access rights
Add, change and delete user accounts
Change your own password
Access target device
To add a new user account (administrator only):
1. On the side navigation bar, select Unit View - Appliance - Appliance Settings - User Accounts -
Local Accounts to open the Appliance Local User Accounts screen.
2. Click the Add button.
3. Enter the name and password of the new user in the blanks provided.
4. Select the preemption and access levels for the new user.
5. Select any of the available target devices that you wish to assign to the user account and click
Add.
NOTE: User administrators and appliance administrators can access all target devices.
6. Click Save.
To delete a user account (administrator only):
1. On the side navigation bar, select Unit View - Appliance - Appliance Settings - User Accounts -
Local Accounts to open the Appliance Local User Accounts screen.
2. Click the checkbox to the left of each account that you wish to delete, then click Delete.
To edit a user account (administrator or active user only):
1. On the side navigation bar, select Unit View - Appliance - Appliance Settings - User Accounts -
Local Accounts. The Appliance Local User Accounts screen is displayed.
2. Click the name of the user you wish to edit. The user profile will appear.
3. Fill out the user information on the screen, then click Save.

3.13 SNMP Settings

SNMP is a protocol used to communicate management information between network management
applications and switches. Other SNMP managers can communicate with your switches by accessing
MIB-II and the public portion of the enterprise MIB. When you open the SNMP screen, the OBWI will
retrieve the SNMP parameters from the unit.
From the SNMP screen, you can enter system information and community strings. You may also designate
which stations can manage the switch as well as receive SNMP traps from the switch. If you select Enable
SNMP, the unit will respond to SNMP requests over UDP port 161.
Vertiv™ | Vertiv™ Avocent® MergePoint Unity™ Switch for Dell® Installer/User Guide |
ACCESS LEVEL
APPLIANCE ADMINISTRATOR
Yes
Yes, for all access levels
Yes
Yes, all target devices
USER ADMINISTRATOR
Yes
Yes, for users and user administrators only
Yes
Yes, all target devices
USERS
No
No
Yes
Yes, if allowed
28