Idos Function Procedures - GE Druck DPI 620 Genii User Manual

User Manual
2.14.2

IDOS Function Procedures

Set the calibrator functions for use on the display.
This includes:
• IDOS function (to measure the pressure)
• If necessary, change the Units for the function
• If necessary, set a Utility for the function:
i
ii
iii
• If necessary, change the Settings for the IDOS function:
• Process (Tare, Alarm, Filter, Flow, Scaling)
i
ii
• Continue with the pressure operation.
06 June 2013
Max/Min/Avg
Switch Test
Leak Test . The procedure is the same for an
IDOS module or for a MC 620/PM 620
assembly.
Leak Test (Only when the Utility is set). The
procedure is the same for an IDOS module or for
a MC 620/PM 620 assembly.
Zero. The procedure is the same for an IDOS
module or for a PM 620 module. Zero the
gauge sensor before use.
K0541 issue 1
Druck DPI620 Genii
Page 62 of 175