User Manual
2.4
Example Procedure: Measure or Source Current
Figure 2-10 shows CH1 set-up to measure or source a
current with external loop power.
Note: When using the CH2 connectors, set CH 2 to measure
or source these ranges with internal or external loop power.
Set the appropriate function by selecting mA or mA +24V.
Loop power has three possible settings:
Figure 2-10 Measure current on CH1. Range ± 55 mA
1. Set the applicable software option.
2. Complete the electrical connections and
continue with the measure or source operation.
3. Source only (Automation). Set the applicable
output value.
06 June 2013
1) OFF
2) 24V
3) 28V
K0541 issue 1
Druck DPI620 Genii
Page 44 of 175