Options - GE Druck DPI 620 Genii User Manual

User Manual
7.11.2

Options

• Poll header every - Sets the refresh rate for the device
parameters displayed in the header.
• Poll all dynamic every - Sets the refresh rate for FF dynamic
variables in the function group view (note this setting only
becomes valid if the function group option Refresh Vars On
is active) (refer to Section 7.7.2).
• Enable Device Library Monitor - If checked enables the
automatic check of the Open Field Communications DD
library on application start up for new Device Descriptions.
Note this configuration option requires a network path to
the Internet. After installation the default setting is 'checked'.
• Confirm Device Commits - If checked brings up a
confirmation dialog before every write is committed to the
field device. After installation the default setting is 'checked'.
• Enable My Device Functions – Enables the My Device and
Export to DPI620 Genii functions. After installation the
default setting is 'checked'.
• Enable Value Range Checking - If checked ensures that all
variable edits are within the limits specified by the device.
After installation the default setting is 'checked'.
• Enable Function Blocks – If checked function blocks are
enabled. After installation the default setting is 'un-
checked'.
• Enable Transducer Blocks – If checked transducer blocks
are enabled. After installation the default setting is
'checked'.
06 June 2013 K0541 issue 1
Druck DPI620 Genii
Page 137 of 175