Preparing The Instrument; Install The Battery - GE Druck DPI 620 Genii User Manual

User Manual
1.8

Preparing the Instrument

On receipt of the instrument check the contents in the
box, listed in section 1.1. It is recommended to retain the
box and packaging for future use.
1.9

Install the Battery

1. Remove the five Pozidriv screws (A) (Ref: Figure 1-1).
2. Remove the battery cover.
3. Check the connections on the battery line up with the
connections in the battery compartment.
4. Place the battery in the battery compartment.
5. Replace the battery cover.
6. Secure the cover with the five Pozidriv screws.
06 June 2013 K0541 issue 1
Druck DPI620 Genii
Page 16 of 175