User Manual
2.2.2 Switch Test
This utility is available with measure or source
functions.
The additional values displayed show signal values
(measure or source) when the instrument detects a switch
opening and closing. The difference between the two values
is displayed as hysteresis value for the switch. This utility
can be used with Ramp Automation, where the rising signal
causes the switch to change state and the falling signal
causes the switch to resume its' original state.
06 June 2013
Figure 2-5 Switch Test Example
K0541 issue 1
Druck DPI620 Genii
Page 39 of 175