Control Data Corporation CDC CC63X Hardware Maintenance Manual page 132

•
11. Set following MIP entries to values indicated below:
F2P3
=
0
F2P4
=
1
F2P5
=
0
F2P6
=
1
F3P2
=
1
12. Enter the desired phone number for proximate handset (or
remote terminal or system) in F7 and F8 fields of MIPs.
Use numerics 0 to 9 for number entries; use D charar-
acter in the sequence to insert a pause until tone is
heard; and use E character in sequence to insert 3
second pause with no tone detected. The last character
entry for a phone number that does not entirely fill all
12 spaces of the F7 and F8 fields must be an F character.
13. Press the COpy key on the terminal keyboard, and then
press the Fl key to return to the mode selection menu.
14. Press .the F2 key to select an auto-dial function of
terminal operating Mode 2. A proximate handset should
start ringing in a short time or a remote terminal (or
system) should be connected. Monitor the dialing
sequence as it appears on the display screen of the
terminal. Operating Mode 2 of the terminal was selected
strictly for purposes of testing the modem. The
important thing is whether the modem reaches the desired
phone number or makes the desired connection; not
whether an operating mode download actually occurs.
15. When checkout of the modem is completed, re-enter the
correct Mode 2 terminal and mode installation parameters
(those recorded during this procedure). Use terminal
operator's guide or reference manual to ensure all
parameters entered make sense for customer's application.
6B-46
62940034 E
'"