Setting The Working Height - DURKOPP ADLER 581 Operating Instructions Manual

Setup
Operating Instructions 581 - 01.0 - 05/2016
7.8

Setting the working height

Fig. 89: Setting the working height
①
(1) - Screws
The working height can be continuously adjusted between 73 cm
and 90 cm (measured to the upper edge of the tabletop).
To set the working height:
1. Loosen the screws (1) on both sides of the stand.
2. Adjust the tabletop of the machine so that it is level at the
desired working height.
To avoid jamming, slide the tabletop in or out evenly at both
sides.
3. Tighten the screws (1).
①
141