Deleting A Buttonhole At The End Of A Sequence; Adding A Buttonhole At The End Of A Sequence - DURKOPP ADLER 581 Operating Instructions Manual

Programming
Operating Instructions 581 - 01.0 - 05/2016
5.4.1

Deleting a buttonhole at the end of a sequence

To delete a buttonhole at the end of a sequence:
1. Use the buttons
the programmed buttonhole sequence.
2. Press the
3. Use the buttons
4. Confirm with the
 The selected buttonhole is deleted.
When you want to quit setting mode, press the
take you back to the user level.
5.4.2

Adding a buttonhole at the end of a sequence

To add a buttonhole at the end of a sequence:
1. Use the button to select the last line of the programmed
buttonhole sequence.
2. Press the
3. Select the desired buttonhole program using the
buttons or
4. Press the
When you want to quit setting mode, press the
take you back to the user level.
or to select the last but one line of
button.
or to select the buttonhole program 0.
button.
button.
.
button.
button. This will
button. This will
67