Decommissioning - DURKOPP ADLER 581 Operating Instructions Manual

Decommissioning

Operating Instructions 581 - 01.0 - 05/2016
8 Decommissioning
You need to perform a number of activities if the machine is to
be shut down for a longer period of time or completely
decommissioned.
WARNING
Risk of injury from a lack of care!
Serious injuries may occur.
ONLY clean the machine when it is switched off.
Allow ONLY trained personnel to disconnect the
machine.
CAUTION
Skin damage from contact with oil!
Oil can cause a rash if it comes into contact with
skin.
Avoid contact with oil residues.
To decommission the machine:
Step
1. Switch off the main switch located centrally under the sewing
material support surface.
2. Unplug the power plug.
3. Disconnect the pneumatic connection.
4. Remove residual oil from the oil pan under the sewing material
support surface using a cloth.
5. Cover the control panel to protect it from soiling.
6. Cover the control to protect it from soiling.
7. Cover the entire machine if possible to protect it from soiling
and damage.
155