106
5.11.2 Sewing proc.
WARNING
Risk of injury from sharp and moving parts!
Crushing, cutting or punctures possible.
Do not perform any maintenance or setting works
during testing.
In the subitem Sewing proc. you can test the sewing process.
To select the Sewing proc. subitem:
1.
Select ( p. 69) Test functions in service mode.
2.
Press the
The following appears on the display:
Fig. 62: Sewing proc.
3.
Press the
on the display.
button.
button so that Sewing proc. is highlighted
Operating Instructions 581 - 01.0 - 05/2016
Programming