Glossary - DURKOPP ADLER 581 Operating Instructions Manual

Glossary

Operating Instructions 581 - 01.0 - 05/2016
12 Glossary
Term
Start bartack
Display
Control panel
User level
CA
CB
Cursor
Speed
Speed limitation
Pressure controller
Threading mode
End bartack
Thread cutter
Explanation
Secures the start of a seam.
Displays information.
You can:
• call up modes
• read values
• read information and error messages
Is located on the side of the machine.
Controls authorization as to which processes can be
performed on the control. There are 4 levels:
• Operator
• Buttonhole programming (P)
• Sequence programming (S)
• Technician (F)
Abbreviation shown by the display:
See Cutting mode.
Abbreviation shown by the display:
See Cutting mode.
Marks the current position in the software on the
display.
Refers to the revolutions per minute performed by
the sewing motor.
See Reduced speed.
Ensures the correct operating pressure.
Mode that can be activated at the push of a button.
Serves as a threading aid.
Secures the end of a seam.
Cuts the thread at the end of a sewing process. It is
located under the sewing material support.
181