Swiveling The Machine Up And Down - DURKOPP ADLER 581 Operating Instructions Manual

Operation
Operating Instructions 581 - 01.0 - 05/2016

4.11 Swiveling the machine up and down

WARNING
Risk of injury from sharp parts!
Punctures possible.
Only swivel up the machine when the machine is
switched off or in threading mode.
Swiveling up
You must swivel the machine up for a variety of activities (e.g. to
thread the looper thread or the gimp thread).
Fig. 27: Swiveling the machine up
①
(1) - Locking bolt
To swivel the machine upwards:
1. Pull out the locking bolt (1).
2. Raise the machine at the front.
3. Release the locking bolt (1) again and allow it to engage in a hole.
To do this, you may have to swivel the machine up and down a
little.
4. Do not let go of the machine until the locking bolt (1) has
engaged.
39