Servicing The Pneumatic System; Setting The Operating Pressure; Draining The Water Condensation - DURKOPP ADLER 581 Operating Instructions Manual

Maintenance
Operating Instructions 581 - 01.0 - 05/2016
6.3

Servicing the pneumatic system

6.3.1

Setting the operating pressure

Information
The operating pressure is 6.5 bar.
The operating pressure is preset and cannot be adjusted.
6.3.2

Draining the water condensation

NOTICE
Property damage from excess water!
Excess water can cause damage to the machine.
Drain water as required.
Water condensation accumulates in the water separator (2) of the
pressure controller.
Proper setting
Water condensation must not rise up to the level of the filter
element (1).
Check the water level in the water separator (2) on a daily basis.
127