Explanation Of Comma; End Command Line Tool; Display Help; Display Memory Information - Mitsubishi Electric MELDAS 600 Series Instruction Manual

.
7.5 Explanation of commands
7.5.1 End command line tool
Command
: 9
Explanation :
This command is used to end the command line tool.
7.5.2 Display help
Command : hor?
Explanation
: This command is used to display a list of usable commands on the screen.
Example:
> h [Enter1
iHelp : 9
h or?
I
d <adrs>,<size>,[width]
m <adrs>,[width]
w <sadrs>,cdadrs>,<size>
e <adrs>,csize>
. t csadrs>,cdadrs>,<sizeZe>
f <adrs>,csize>,<data>
c <adrs>,<size>
v <adrsl>,<adrs2>,csize>
r
- exit cmd line mode
- print
help
- print memory list
- display memory
- modify
memory
- write
FROM
- erase FROM
- copy memory
- fill memory
- clear memory
- compare memory
- M6 mainte tool copy
7.5.3 Display memory information
Command : 1
Explanation :
This command is used to display a list of lead addresses
and
sizes of FROM and
SRAM on the CPU card, C-BUS#l, and GBUS#2. Refer to this list when designating
addresses with other commands.
Example:
>I IEnter
[Memory List] :
Bus Card
Mem Top Adrs Size
Mem Top Adrs Size
_--__--_-______-________________________-----------------------------------------------------------
OnBoard Hi31 138 From: OxaeOOOOOO 0x800000
Sram:
Oxa Ox080000
C-Bus#l HR437B From: Oxac400000 0x400000 Sram: OxacOOOOOO 0x200000
C-Bus#2 HR4!37B From: Oxaa400000 0x400000 Sram: OxaaOOOOOO Ox200000
-79,