Explanation Of Commands - Mitsubishi Electric MELDAS 600 Series Instruction Manual

4.3 Explanation of commands
a) alit
This command is used to quit the MEMORY BACK UP menu, and the screen returns to the M6
Maintenance Tool main screen.
0) Restart
This command is used to restart the memory back up tool.
1) Write
This command is used to write the data of the selected memory to the backup cassette. If the
selected memory and backup cassette sizes differ, the backup range is as follows.
Sel e ded
memory < Badwp cassette
The data before o&h
%Z (Note) The data i n t I!
rem&s In thts region.
Is real o n Is cleared for OX Sedes
Sel e ded memory > Backup cassette
[ +;g:;ta i n this regbn 6 not
cassettes.
+ Backup by block deslgnation
This is only used when on-board SHAM is selected as the memory. With block designation, several
items of data can be stored in the backup cassette as one block in 512 KB units of on-board SHAM.
Note that an HR Series ROM cassette (cassette with a larger capacity than the on-board SHAM)
must be used as the backup cassette.
On-board SHAM
4
512Kbyte ,-,
\
For an HR4Ol cassette
c This is also used as an information area.
Block #2
1-1 y%%.No.ofblookdependsonthe
size of the backup cassette.
* When setting the information area
When creating an information area with "Create Info Area", a comment (up to 15 characters) and
date (automatically set) can be added to the backup data.
After a Write command is executed, the following message is output and the program waits for
comment input.
Set Comment --, 123456789012345 fEnter1
-8-