Meate A Wpy Of The M6 Maintenance Tool - Mitsubishi Electric MELDAS 600 Series Instruction Manual

. .
_.
7.512 Create a copy of the M6 Maintenance Tool
Command : r
Explanation : This command is used to create a copy of the M6 Maintenance Tool. This command
is executed with the copy source HR98x (maintenance toot) mounted on C-EWS#2,
and the copy destination HR98x mounted on C-BUSH1 .
Example:
>r [Enter]
ToolCopy C-Bus#2 HR98x --> C-Bus#l HR98x
Copy ? P/ES:Y(y) / NO:N(n)] --> y [Enter]
Erase
k-1
Programming
14
Compare
OK
i
-35-