L& Of Cammlds; Mmand Format - Mitsubishi Electric MELDAS 600 Series Instruction Manual

7.3 List of commands
a
Command
Details
1 End command line tool.
h or? Display help.
I Display memory information.
d <Address>, <Size>, [Display width] Display memory.
m <Address>, [Display width] Modify memory.
w <Address l>, <Address 2>, <Size> Erase and write FROM.
e <Address>. <Size> Erase FROM.
t <Address l>, <Address 2>, <Size> Copy memory.
f <Address>, <Size>, <Data> Write memory.
c <Address>. <Size> Clear memorv.
v <Address l>, <Address 2>, <Size> Compare memory.
r
Create a copy of the M6 Maintenance Tool.
7.4 Command format
The command format is as follows.
> <Command> <Parameter l>, <Parameter 2>, <Parameter 3~ [Enter]
I I
I
I I I
I I
Prompt Space code Comma
Line feed code
Command : Command to be input.
Parameters 1, 2, 3 : Parameters determined by the command.
Put
a space code after commands, and a comma " , * between
parameters.
Supplement:
l
Input characters are deleted by pressing [CTRL + H] or DEL.
l
Input hexadecimals before the 0 and lowercase x or before the uppercase X and then designate.
(Example: 0x7~ 0x1 a, OX7fff, OX1 2345)