Memory Back Up; Preparation - Mitsubishi Electric MELDAS 600 Series Instruction Manual

4. Memory Back Up
This command is used to back up the FROM and SFWM data of cassettes mounted on the on-board
FROM, SRAM or C-BUS #l to the C-BUS #2 backup cassette.
4.1 Preparation
Mount the Maintenance Tool cassette (HR98x) on C-BUS #2. Mount the cassette to be used for
memory backup on the expansion C-BUS of the maintenance tool (HR98x). Refer to the section titled
"Mounting the maintenance tool cassette" for details when mounting the cassette.
HR Series or QX Series ROM cassettes can be used for memory backup.
List of memory cassettes *
Cassette name
Remarks
I
QX818
I
3MB
I
OK6 *l
*l : Cassette that can be used for on-board SRAM backup.
+2 : Cassette in which block No. designation and information area setting is possible in the on-
board SRAM backup.
-6-