Modify Memory - Mitsubishi Electric MELDAS 600 Series Instruction Manual

7.5.5 Modify memory
Command
: m <Address>, [Display width]
<Address> : Memory address to be changed.
[Display width] : Display units (1: char, 2: short, 4: long). Can be omitted.
Explanation : This command is used to display the <Address> details and
change the data. This
command is ended by inputting a period * . *.
The display units can be changed using the <Display width> setting. The default
setting is "short" units.
Example:
1) Display in "char" units
>m OxaaOOOOOO. 1 fEnter1
aaOOOOO0: 07-l 1 fEnter1
aaOOOOO1: 01-22 rEnterI
aaOOOO02: lo-. fEnter1
.'
I Change data.
* Change data.
* Input a period
l
.
l
and end the command.
2) Display in "short" units
>m OxaaOOOOOO,2 IEnter
aa000000: 0107-1234 fEnten
aaOOOO02: 1000-5678 rEnterI
aaOOOO04: 0000-. fEnter1
* Change data.
' * Change data.
t Input a period " . * and end the command.
3) Display in "long" units
>m OxaaOOOOO0.4 rEnterI
aaOOOOO0: 10000107-12345678 rEnterI
aaOOOO04: 00000000-9abodefO fEnterl
aa000008: 10000112-. fEnter1
* Change data.
+ Change data.
* Input a period " .
l
and end the command.
-3l-