Mounting The Maintenance Tool Cassette - Mitsubishi Electric MELDAS 600 Series Instruction Manual

2.3 Mounting the maintenance tool cassette
The following shows the cassette mounting location.
1) The maintenance tool (HR98x cassette) is mounted on C-BUS #2 of the HR113 or HRl 11 card.
2) Depending on the functions to be used, cassettes for memory backup or cassettes for copying
FROM cassettes may be mounted in addition to the maintenance tool (HR98x cassette). Mount the
cassettes using the following drawing as a reference.
(Note) Always mount/remove cassettes with the CNC power OFF
Back view of
unit
ir-segment LED \
CN6 reset
Rotary switch
I
Memory cassette
I
Espansion C-BUS
(EXTC-BUS)
Roteryswfich 1
Rotary switch 2
1
Mount the HR96x card on C-BUS #2
El
Memorycessette