Mitsubishi Electric MELDAS 600 Series Instruction Manual page 29

(1) Firmware module model No.
Set the following range values according to the amplifier type.
Not registered : Oxff
Servo : 0x00 - Ox3f
Spindle : 0x40 - Ox7f
(2) Module attributes
These are not used in the M6 downloading. Normally set to 0.
(3) Bank A block No.
This is the block No. that includes the first bank (bank A) of the firmware module.
Block #O 0x00008000 - 0x0001 ffff (relative address)
Block #l 0x00020000 - oxOoo37fff
(4) No. of banks
This is the No. of banks that include one firmware module.
Value from 1 to 4.
(5) System No.
g-character ASCII code.
-
26
-